注塑模具加工对应的产品类别主要由塑胶材料制成，与之对应的加工方式也大同小异。注塑模具加工工艺是否精准到位，关乎成品的精度与实际质量水准，若未达到标准，有必要采取返工等方式，对工厂带来的损失将不可估量，为此需关注加工期间应落实到位的事项。济南注塑加工厂家认为注塑模具加工时要看其设备运行状态！

The product categories corresponding to the processing of injection molds are mainly made of plastic materials, and the corresponding processing methods are also similar. Whether the processing technology of the injection mold is accurate and in place is related to the accuracy and actual quality level of the finished product. If it does not meet the standard, it is necessary to adopt rework and other methods, and the loss to the factory will be immeasurable. Therefore, it is necessary to pay attention to the matters that should be implemented during the processing. Jinan injection molding factory believes that the processing of injection molds should be based on the operating status of its equipment!

1、全程关注设备运行的状态是否正常

1. Pay full attention to whether the equipment operates normally

有意向的客户会加倍留意注塑模具加工视频，希望能从中看出一些端倪，与其把注意力放在视频上，倒不如直接关注注塑模具加工的运行状态。此举的好处是能起到监控的作用，从装置运行期间的具体表现能大致推断出它是否正常，这一点较关键。

Interested customers will pay more attention to the video of injection mold processing, hoping to see some clues from it. Instead of focusing on the video, it is better to directly focus on the operation status of injection mold processing. The advantage of this action is that it can play a comprehensive monitoring role, and it is critical to roughly infer whether the device is normal from the specific performance during operation.

2、提前调试好设备的相关按钮

2. Relevant buttons of the equipment shall be debugged in advance

注塑模具加工时的注意事项包括对各种按钮的精准调控，毕竟这属于一项度高的加工任务，但凡出现较大偏差引发的后果将不堪设想。若是能通过调试这一行为将按钮各归其位，便可以规避偏差的产生，而这也是操作人员会反复考量的内容。

Precautions during injection mold processing include precise control of various buttons. After all, this is a highly professional processing task, and the consequences caused by any large deviation will be unimaginable. If the buttons can be placed in their respective positions through debugging, the deviation can be avoided, which is also the content that operators will consider repeatedly.

3、注意控制料流的速度

3. Pay attention to control the speed of material flow

注塑模具加工时的注意事项还包括对料流速度的控制，千万别轻易忽略这一点，若对速度的把控不恰当，会导致料流过快凝固，干扰其余工作的正常开展。一旦料流凝固的速率过快，甚会降低成品的精度，相信这是客户不愿亲眼目睹的场景。

Precautions during the processing of injection molds also include the control of material flow speed, which should not be easily ignored. If the speed is not properly controlled, the material flow will solidify quickly and interfere with the normal development of other work. Once the solidification rate of the material flow is too fast, the accuracy of the finished product will even be reduced. I believe this is a scene that customers do not want to witness.

为了推动整项注塑模具加工工作稳步向前，上文归纳总结的三部分工作务必落实到位，以免因一时疏漏引发不必要的损失和问题。尤其是本身操控不熟练的人，越发要把这几项内容深谙于心，旨在完善自己的操控流程，做到万无一失。关注我们http://www.sdlqmj.com，咨询了解更多事项！

In order to promote the steady forward recommendation of the whole injection mold processing work, the three parts of work summarized above must be implemented in place to avoid unnecessary losses and problems caused by temporary omissions. In particular, people who are not proficient in their own control should be more familiar with these contents in order to improve their own control process and make sure that they are safe. Follow us http://www.sdlqmj.com Yes, consult for more information!