相关模具的生产质量要想好就需要在注塑加工环节中多下功夫，比如说技术要求方面是要严格遵守相关准则的，这样才不会容易出问题，那么相关模具注塑加工的技术要求如何？

　　The production quality of the relevant mold needs to be good in the injection molding process, such as technical requirements are to strictly comply with the relevant guidelines, so it will not be easy to go wrong, so how about the technical requirements of the injection molding process of the relevant mold?

　　在相关模板加工过程中，各环节的操作人员应根据相关模板加工工艺的材料型号、规格、尺寸和施工图进行加工。施工过程不清时，立即停止下道工序的加工，下道工序前及时咨询现场技术人员。

　　In the process of the related template processing, the operator of each link should process according to the material model, specification, size and construction drawing of the related template processing technology. When the construction process is not clear, stop the processing of the next procedure immediately, and consult the on-site technical personnel before the next procedure.

　　相关模板加工的和关键环节。工艺、站台和相关模板的焊接应个人负责，工艺和零件在工艺过程中出现质量问题时，应采取必要的预防措施，防止不必要的质量返工。

　　Focus and key link of related template processing. Welding of process, platform and related formwork shall be the responsibility of the individual, and necessary preventive measures shall be taken to prevent unnecessary rework of quality when quality problems occur in process and parts.

　　相关模板的成型需要在模具上进行。对于螺栓孔的装配，应预先拧紧装配螺栓孔，以防止装配螺栓孔或其他相邻零件尺寸的错位。在相关模板加工过程中。各环节操作人员应注意施工人员，加工机械，加工半成品，配件意外损坏的可能，提前做好防范。

　　The forming of the related template needs to be carried out on the mold. For the assembly of bolt holes, the assembly bolt holes should be tightened in advance to prevent the size dislocation of the assembly bolt holes or other adjacent parts. In the processing of related templates. Operators of all links should pay attention to the possibility of accidental damage of construction personnel, processing machinery, semi-finished products and accessories, and take precautions in advance.

　　济南注塑加工厂家认为，在相关模板制作过程中，面板的角度应在折弯机上弯曲。当不需要圆角半径时，弯曲半径应为钢板厚度的1.5倍。部分刚性轮胎模具进行施工，成型筋组装焊接-筋拉直检查-骨架组装定位焊接-组装成对面板焊接成型。

　　The Angle of the panel should be bent on the bending machine during the related formwork. When fillet radius is not required, the bending radius should be 1.5 times the thickness of the plate. Part of the rigid tire mold construction, forming bar assembly welding - bar straightening inspection - skeleton assembly positioning welding - assembly of panel welding molding.

　　许多厂商和团队需要与企业建立合作关系，以实现互利共赢的目标。很多人在考量厂家是否值得合作时，想到的是商业经济利益，即模具加工厂家提出的合作，这方面还是要多注意。更多内容了解就来网站www.sdlqmj.com吧。

　　Many vendors and teams need to establish cooperative relationships with enterprises to achieve mutually beneficial goals. When many people consider whether manufacturers are worthy of cooperation, they think of commercial and economic interests, that is, the cooperation price proposed by mold processing manufacturers, which should be paid more attention to. For more information, visit www.sdlqmj.com.