塑料模具产品的质量是用户所关注的问题，毕竟这关系到使用是否能成功顺利，所以塑料模具在进行注塑加工时要满足一定的性能要求才行，下面来看看相关内容。

　　The quality of plastic mold products is the concern of users, after all, it is related to the success of the use of smooth, so the plastic mold in injection processing to meet certain performance requirements, let's take a look at the relevant content.

　　塑料模具的主要作用要求在塑料薄膜成型过程中，模具的质量对保证产品质量的作用不言而喻。不同类型的塑料模具和不同产品的成型工艺对模具的材料、功能和形状有不同的要求。

　　The main role of plastic mold in the plastic film forming process, the quality of the mold to ensure the quality of the product is self-evident. Different types of plastic moulds and the molding process of different products have different requirements on the material, function and shape of moulds.

　　为了美化许多塑料模具，在其表面添加了条纹图案。在皮革工业中，使用大型皮革图案压花板，这要求模具具有良好的图案光蚀性。

　　In order to beautify many plastic moulds, striped patterns were added to their surfaces. In the leather industry, large leather patterned embossing boards are used, which requires the molds to have good pattern photocorrosion.

　　强度和韧性高，在操作温度下具有令人满意的温度，模具的操作条件大多非常苛刻，有的经常承受较大的载荷，从而导致脆性断裂。挤出成型压力大。因此，为了防止模具零件在运行过程中突然脆性断裂，模具必须具有较高的强度和韧性。

　　High strength and toughness, with satisfactory temperature at the operating temperature, the operating conditions of the mold are mostly very harsh, and some often bear large loads, resulting in brittle fracture. Extrusion forming pressure is large. Therefore, in order to prevent the sudden brittle fracture of die parts during operation, the die must have high strength and toughness.

　　耐热性，随着高速成型机的出现，塑料模具的生产速度加快了。当模具的工作温度较高时，模具的硬度和强度会降低，导致模具的早期磨损或塑性变形而失效。为保证模具在使用中的精度和小变形，模具钢应具有较高的耐热性。

　　Heat resistance, with the emergence of high speed molding machine, plastic mold production speed up. When the working temperature of the die is high, the hardness and strength of the die will be reduced, resulting in early wear or plastic deformation of the die and failure. In order to ensure the precision and small deformation of the die in use, the die steel should have high heat resistance.

　　耐腐蚀性和耐腐蚀性在ABS树脂中加入阻燃剂和聚氯乙烯，在成型过程中可能会散发出腐蚀性气体，有时模具会在空气流道口处生锈和损坏，因此要求模具具有良好的耐腐蚀性。

　　Corrosion resistance and corrosion resistance In ABS resin with flame retardants and PVC, in the process of forming may emit corrosive gases, sometimes the mold will rust and damage at the air channel mouth, so the mold is required to have good corrosion resistance.

　　济南注塑模具提醒，随着塑料模具用途的扩大，常在塑料中加入玻璃纤维等无机材料来增强可塑性。由于添加了添加剂，塑料的流动性大大降低，导致模具磨损，所以需要模具具有出色的耐磨性。

　　Ji 'nan injection mold remind, with the expansion of the use of plastic mold, glass fiber and other inorganic materials are often added to plastic to enhance plasticity. Due to the addition of additives, the fluidity of plastic is greatly reduced, resulting in mold wear, so the mold needs to have excellent wear resistance.

　　塑料模具在注塑过程中的性能要求相关内容已经讲解了，希望能够给您有效的帮助，当然假如您有问题没处理好可以随时来网站www.sdlqmj.com联系我们咨询一下。

　　The performance requirements of plastic moulds in the process of injection molding have been explained. I hope to give you effective help. Of course, if you have problems, you can contact us at www.sdlqmj.com at any time.