Injection mold is a very strict work, the cost is very high, so to dust, rust and pressure. After mold production, should check anti-rust, according to the regulations on the mold rack, and according to the "Mold use, Maintenance and maintenance specifications" requirements to use the mold, to prevent human negligence caused mold damage, prolong the service life of the mold, ensure smooth production, stable product quality.

　　目前国内大多数塑料加工厂的模具管理还没有系统的标准模式，管理办法是根据各厂的规模和特点制定的。中小企业和大企业，和非的塑料厂有不同的管理方法。然而，它们在基本实践和预期目的上是相似的。企业应根据自身特点和实际情况建立管理制度，使模具在管理中得到妥善保管，达到预期的使用寿命。

　　At present, there is no systematic standard mode for mold management of most plastic processing plants in China, and the management method is formulated according to the scale and characteristics of each plant. Small and medium-sized enterprises and large enterprises, professional and non-professional plastic factories have different management methods. However, they are similar in basic practice and intended purpose. Enterprises should establish management system according to their own characteristics and actual situation, so that molds can be properly kept in management and reach the expected service life.

　　注塑模具存放处应平整、干燥、清洁，便于起吊和搬运。小模具可以按顺序排列存放，大模具可以直接放在垫子上。分开存放时，应把相同产品的模具放在一起。由于每个单元的实际情况和条件不同，很难强加具体的存储方法，但注意事项是相似的。

　　The storage place of injection mould should be smooth, dry and clean for lifting and handling. Small molds can be stored in order, large molds can be placed directly on the mat. When storing separately, the molds of the same product should be put together. It is difficult to impose specific storage methods because of the different realities and conditions of each cell, but the considerations are similar.

　　大多数注塑模具在使用中受到操作人员的重视，但在储存过程中经常被忽略。但是在实际生产中，经常会出现模具存放不良，导致生产损失严重的情况，需要引起重视。

　　Most injection moulds are valued by operators in use, but often ignored in storage. However, in the actual production, there will often be poor storage of molds, resulting in serious production losses, which needs to be paid attention to.

　　注塑模具的存储和管理是注塑行业的一项重要工作。如果注塑模具的存放管理不到位，注塑模具会生锈损坏。找模具或者用错模具甚扔掉都需要很长时间。所以不管怎么样，只要您做了注塑模具这个事情，就需要重视起来。还有问题的话就来http://www.sdlqmj.com咨询吧。

　　Injection mold storage and management is an important work in injection molding industry. If the storage management of injection molds is not in place, they will rust and be damaged. Finding the mold or using the wrong mold or even throwing it away can take a long time. So anyway, as long as you do the injection mold this thing, you need to pay attention to it. If you have any questions, go to http://www.sdlqmj.com.